FusionServer G8600 V7

XFUSION INTERNATIONAL PTE. LTD. FusionServer G8600 V7 is a new-generation flagship AI server ideal for high-performance scenarios such as large-scale accelerated computing, scientific computing, and image and data analysis. It features flagship computing power, ultimate energy efficiency, high reliability, and easy O&M. - General computing power: 2 x 4th or 5th Gen Intel® Xeon® Scalable processors with 385 W TDP per processor, and 32 x DDR5 DIMMs, improving the overall performance by up to 50% - Intelligent computing power: 8 x GPU modules with the unmatched computing power in the industry - Optimal architecture: compatible with the high-performance and balanced NVIDIA topologies; PCIe 5.0 devices in cable-free chassis without Retimer chips Ultimate Energy Efficiency - The 54 V and 12 V dual-plane architecture combined with the Model Predictive Control (MPC) algorithm for GPUs and CPUs enables 5.9% higher energy efficiency than the industry average and saves 500 W power under the typical load - Compared with the 12 V PSUs, the dual-partitioned 54 V and 12 V PSUs reduce a power conversion step, saving 76 W power per server - Self-developed 54 V and 12 V Titanium PSUs improve the power efficiency by 2% compared with Platinum PSUs under 50% load - The 54 V PSUs support dual inputs, improving the power load rate and promoting the power efficiency - The MPC algorithm for heat dissipation control saves about 1.1% power for fan modules - Highly reliable power supply architecture: 54 V dual-bus PSUs allow a smaller PSU amount and higher - Modular and easy O&M: Six modules (GPU, CPU, fan, power supply, and I/O modules) can be replaced without being removed from the chassis, reducing maintenance time by 2.5 times - Fan module and PSU redundancy: GPU and CPU fan modules in N+1 redundancy, 12 V PSUs in 1+1 redundancy, and 54 V PSUs in N+M redundancy Processor 2 x 4th/5th Gen Intel® Xeon® Scalable processors, with up to 385 W TDP per processor Memory 32 x DIMMs, up to 256 GB per DIMM, up to 5600 MT/s 8 x 2.5" front SAS/SATA drives + 8 x 2.5" rear NVMe SSDs Flash storage: dual M.2 SSDs RAID 0, 1, 10, 5, 50, 6, or 60; supercapacitors for cache data protection from power failures; RAID level migration, drive roaming, self-diagnosis, and remote web-based configuration GPU Module 8 x GPU modules Network 2 x OCP 3.0 NICs, which can be configured as required and supports orderly hot swap PCIe Expansion Up to 13 x PCIe slots, including 12 x standard PCIe 5.0 x16 slots and 1 x OCP 3.0 slot Fan Module GPU: 10 x 54 V fan modules in N+1 redundancy; CPU: 5 x 12 V fan modules in N+N redundancy 6 x 3000 W Titanium hot-swappable PSUs，Cabinet-level N+N redundancy backup with 2+2, 3+1, 3+3, 4+2, PSU and 5+1 configuration based on the load is supported. 2 x 3000 W Titanium or 2000 W Titanium/Platinum hot-swappable PSUs in 1+1 redundancy The iBMC chip integrates one dedicated management GE network port, providing comprehensive management features such as fault diagnosis, automatic O&M, and hardware security hardening. - The iBMC supports standard interfaces such as Redfish, SNMP, and IPMI 2.0, provides a remote management user interface based on HTML5/VNC KVM; supports out-of-band management functions such as monitoring, diagnosis, configuration, Agentless, and remote control for simplified management - It is optional to configure the FusionDirector management software that provides advanced management features such as five intelligent technologies, enabling intelligent, automatic, visualized, and refined management throughout the lifecycle OS Ubuntu, SUSE Linux Enterprise Server, Red Hat Enterprise Linux, and others Security Power-on password, administrator password, Trusted Platform Module (TPM) 2.0, and secure boot 5°C to 35°C (41°F to 95°F), compliant with ASHRAE Class A1/A2/A3 Certific0ation 2CQC, CE, and RoHS Installation Suite L-shaped guide rails 352.8 mm x 447 mm x 925 mm (13.89 in. x 17.60 in. x 36.42 in.) No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of xFusion International Trademarks and Permissions and other xFusion trademarks are trademarks of xFusion International Pte. Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. In this document, "xFusion" is used to refer to "xFusion International Pte. Ltd." for concise description and easy understanding, which does not mean that "xFusion" may have any other meaning. Any "xFusion" mentioned or described hereof may not be understood as any meaning other than "xFusion International Pte. Ltd.", and xFusion International Pte. Ltd. shall not bear any liability resulting from the use of "xFusion". The purchased products, services and features are stipulated by the contract made between xFusion and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherw