FusionServer X6000 V5

xFusion Digital Technologies Co., Ltd. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of xFusion Digital Technologies Co., Ltd. Trademarks and Permissions and other xFusion trademarks are trademarks of xFusion Digital Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective In this document, "xFusion" is used to refer to "xFusion Digital Technologies Co., Ltd." for concise description and easy understanding, which does not mean that "xFusion" may have any other meaning. Any "xFusion" mentioned or described hereof may not be understood as any meaning other than "xFusion Digital Technologies Co., Ltd.", and xFusion Digital Technologies Co., Ltd. shall not bear any liability resulting from The purchased products, services and features are stipulated by the contract made between xFusion and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. xFusion Digital Technologies Co., Ltd. Address: 9th Floor, Building 1, Zensun Boya Square, Longzihu Wisdom Island Zhengdong New District 450046 People's Republic of China Website: https://www.xfusion.com Issue 04 (2023-11-30) Copyright © xFusion Digital Technologies Co., Ltd. i Technical White Paper About This Document This document describes the X6000 server in terms of appearance, features, system architecture, components, security management, system management, and technical This document is intended for pre-sales engineers. The symbols that may be found in this document are defined as follows. Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. Issue 04 (2023-11-30) Copyright © xFusion Digital Technologies Co., Ltd. ii Technical White Paper About This Document 04 2023-11-30 Added 8 Waste Product Recycling. 03 2023-02-28 Updated 1 Product Overview. 02 2022-11-30 This issue is the second official release. 01 2021-11-02 The issue is the first official release. Issue 04 (2023-11-30) Copyright © xFusion Digital Technologies Co., Ltd. iii Technical White Paper Contents About This Document.........................................................................................................ii 1 Product Overview............................................................................................................1 1.1 Overview......................................................................................................................................................1 1.2 Features.......................................................................................................................................................2 2 System Architecture........................................................................................................4 2.1 Server Design..............................................................................................................................................4 2.2 Cooling Design.............................................................................................................................................5 2.3 Management and Monitoring.......................................................................................................................7 2.4 Advantages..................................................................................................................................................9 3 Hardware Description....................................................................................................10 3.1 Enhanced Chassis.....................................................................................................................................10 3.1.1 Appea

xfusion виртуализация

Цена по запросу

Отправьте запрос — пришлём актуальную цену и срок поставки в течение рабочего дня.

Запросить цену

Добавить в избранное

Условия и положения
30-дневная гарантия возврата денежных средств
Доставка: 2–3 рабочих дня

Свяжитесь с нами

Новый Срок поставки: 21 дн.

Характеристики

Altitude: ● Operating altitude: ≤ 3 | 050 m (10006.44 ft) NOTE When the server is used at an altitude between 900 m (2952.76 ft) and 3050 m (10006.44 ft), the maximum operating temperature decreases by 1°C (1.8°F) for every increase of 300 m (984.25 ft). ● HDDs are not supporte | 050 m (10006.44 ft). ● Titanium PSUs are required when the altitude is higher than 3 | 050 m (10006.44 ft). Corrosive Air Pollutant: ● Corrosion rate of the copper test piece: < 300 Å/month (in compliance with the ANSI/ISA-71.04-2013 gaseous corrosion level G1). ● Corrosion rate of the silver test piece: < 200 Å/month. Corrosive Gaseous Contaminant: ● Copper corrosion rate test requirements: The corrosion product thickness growth rate is lower than 300 Å/month (meeting level G1 requirements of the ANSI/ISA-71.04-2013 standard on gaseous corrosion). ● Silver corrosion rate test requirem Dimensions H X W X D: 86.1 mm x 436 mm x 805 mm (3.39 in. x 17.17 in. x 31.69 in.) Figure 6-2 Physical dimensions NOTE ● The depth includes the mounting ear size. ● The minimum cabinet depth is 1 m (3.28 ft.). ● See Figure 6-2 for methods in measuring physical d Fan Modules: Four fan modules in N+1 redundancy mode server: 2U multi-node server Input Voltage: ● 2000 W PSU: – 200 V to 220 V AC | 50Hz/60Hz – 220 V to 240 V AC | 50Hz/60Hz – 240 V DC ● 1500 W PSU: – 100 V to 120 V AC | 50Hz/60Hz – 200 V to 240 V AC | 50Hz/60Hz – 240 V DC ● Enhanced 1500 W PSU: – 100 V to 127 V AC | 50Hz/60Hz – 240 V DC ● 1200 W PSU: – -48 V to -60 V DC Management Ports: ● One aggregation network port on the server chassis for unified chassis management ● One management port on each server node Maximum Temperature Fluctuation Rate: < 20°C/h (68°F/h) Particulate Pollutant: ● The ISO14664-1 Class 8 requirements are met. You are advised to ask a professional organization to monitor particulate pollutants in the equipment room. ● There is no explosive, conductive, magnetic, or corrosive dust in the equipment roo Power Consumption: The power consumption parameters vary with server configurations. For details about how to calculate the power consumption, contact technical support. Psus: Two 3000 W AC (or 240 HVDC) PSUs NOTE ● The X6000 PSUs support 1+1 redundancy mode only when the server power consumption is lower than the power of a single PSU. ● If the input power is between 100 V and 130 V, the working power of each PS Rated Power: The rated power for compatible PSUs: ● 220 V to 240 V AC or 240 V DC: 2000 W ● 200 V to 240 V AC or 240 V DC: 1500 W ● -48 V to -60 V DC: 1200 W Relative Humidity Non Condensing: Operating humidity: 8% to 90% RH Storage humidity: 5% to 95% RH Relative Humidity Rh Non Condensing: ● Operating humidity: 8% to 90% ● Storage humidity (within six months): 5% to 85% ● Storage humidity (within one year): 20% to 75% ● Maximum change rate: 20%/h Server Nodes: 2U high with 4 nodes Shock: Half sine wave, peak acceleration of 2 G | 11 ms | 3 times for each surface, and a total of three axial directions Vibration: One cyclical sweep in each axial direction at the rate of 0.1 oct/min, with a total of three axial directions 5 Hz to 10 Hz: 5 mm (0.20 in., peak-to-peak value) 10 Hz to 100 Hz: 1 m/s2 Weight: ● Server with 2.5-inch hard disks: 40 kg (88.20 lb) ● Server with 3.5-inch hard disks: 45 kg (99.23 lb) ● Packing: 4.75 kg (10.47 lb)

Altitude	● Operating altitude: ≤ 3 \| 050 m (10006.44 ft) NOTE When the server is used at an altitude between 900 m (2952.76 ft) and 3050 m (10006.44 ft), the maximum operating temperature decreases by 1°C (1.8°F) for every increase of 300 m (984.25 ft). ● HDDs are not supporte \| 050 m (10006.44 ft). ● Titanium PSUs are required when the altitude is higher than 3 \| 050 m (10006.44 ft).
Corrosive Air Pollutant	● Corrosion rate of the copper test piece: < 300 Å/month (in compliance with the ANSI/ISA-71.04-2013 gaseous corrosion level G1). ● Corrosion rate of the silver test piece: < 200 Å/month.
Corrosive Gaseous Contaminant	● Copper corrosion rate test requirements: The corrosion product thickness growth rate is lower than 300 Å/month (meeting level G1 requirements of the ANSI/ISA-71.04-2013 standard on gaseous corrosion). ● Silver corrosion rate test requirem
Dimensions H X W X D	86.1 mm x 436 mm x 805 mm (3.39 in. x 17.17 in. x 31.69 in.) Figure 6-2 Physical dimensions NOTE ● The depth includes the mounting ear size. ● The minimum cabinet depth is 1 m (3.28 ft.). ● See Figure 6-2 for methods in measuring physical d
Fan Modules	Four fan modules in N+1 redundancy mode
Форм-фактор	2U multi-node server
Input Voltage	● 2000 W PSU: – 200 V to 220 V AC \| 50Hz/60Hz – 220 V to 240 V AC \| 50Hz/60Hz – 240 V DC ● 1500 W PSU: – 100 V to 120 V AC \| 50Hz/60Hz – 200 V to 240 V AC \| 50Hz/60Hz – 240 V DC ● Enhanced 1500 W PSU: – 100 V to 127 V AC \| 50Hz/60Hz – 240 V DC ● 1200 W PSU: – -48 V to -60 V DC
Management Ports	● One aggregation network port on the server chassis for unified chassis management ● One management port on each server node
Maximum Temperature Fluctuation Rate	< 20°C/h (68°F/h)
Particulate Pollutant	● The ISO14664-1 Class 8 requirements are met. You are advised to ask a professional organization to monitor particulate pollutants in the equipment room. ● There is no explosive, conductive, magnetic, or corrosive dust in the equipment roo
Power Consumption	The power consumption parameters vary with server configurations. For details about how to calculate the power consumption, contact technical support.
Psus	Two 3000 W AC (or 240 HVDC) PSUs NOTE ● The X6000 PSUs support 1+1 redundancy mode only when the server power consumption is lower than the power of a single PSU. ● If the input power is between 100 V and 130 V, the working power of each PS
Rated Power	The rated power for compatible PSUs: ● 220 V to 240 V AC or 240 V DC: 2000 W ● 200 V to 240 V AC or 240 V DC: 1500 W ● -48 V to -60 V DC: 1200 W
Relative Humidity Non Condensing	Operating humidity: 8% to 90% RH Storage humidity: 5% to 95% RH
Relative Humidity Rh Non Condensing	● Operating humidity: 8% to 90% ● Storage humidity (within six months): 5% to 85% ● Storage humidity (within one year): 20% to 75% ● Maximum change rate: 20%/h
Server Nodes	2U high with 4 nodes
Shock	Half sine wave, peak acceleration of 2 G \| 11 ms \| 3 times for each surface, and a total of three axial directions
Vibration	One cyclical sweep in each axial direction at the rate of 0.1 oct/min, with a total of three axial directions 5 Hz to 10 Hz: 5 mm (0.20 in., peak-to-peak value) 10 Hz to 100 Hz: 1 m/s2
Weight	● Server with 2.5-inch hard disks: 40 kg (88.20 lb) ● Server with 3.5-inch hard disks: 45 kg (99.23 lb) ● Packing: 4.75 kg (10.47 lb)

Запчасти конфигурации 60 — открыть страницу каждой

[HUAWEI-HUAWEI-CPU-2-INTEL-XEON-SCALABLE-PROCESSORS] 2 Intel®Xeon®Scalable processors

FusionServer X6000 V5

Характеристики

Запчасти конфигурации 60 — открыть страницу каждой

Похожие и взаимозаменяемые

Processor

Memory

Internal Storage

Power Supply

Expansion Cards

[AOC-VROCPREMOD] Intel VROC HW Key (RSTe) - Premium, RAID 0, 1, 5, 10

[AOC-S3816L-L16iT] Standard LP, 16 internal ports (12Gb/s) Gen-4, 122HDD;

[CBL-SAST-0593] Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E

[AOM-S3108M-H8] Supermicro LP, 8 internal ports (12Gb/s) SAS Mezzanine;

[AOC-S3216L-L16iT] 16x SAS3 ports PCIe 3.0x8 HBA controller add-on card with 4x internal mini-SAS HD connectors using Broadcom 3216 chip,RoHS

[LEN-0000001CV841] Emulex 16Gb Gen6 FC Dual-Port HBA

[LEN-0000001CV831] Emulex 16Gb Gen6 FC Single-Port HBA

[HPE-HPE-STORAGE-P9D93A] HPE SN1100Q 16Gb 1p FC HBA(P9D93A)

[HPE-HPE-STORAGE-P9D94A] HPE SN1100Q 16Gb 2p FC HBA(P9D94A)

[HPE-HPE-STORAGE-Q0L13A] HPE SN1200E 16Gb 1p FC HBA(Q0L13A)

[HPE-HPE-STORAGE-Q0L14A] HPE SN1200E 16Gb 2p FC HBA(Q0L14A)

[HPE-HPE-STORAGE-Q0L11A] HPE SN1600E 32Gb 1p FC HBA(Q0L11A)

[HPE-HPE-STORAGE-Q0L12A] HPE SN1600E 32Gb 2p FC HBA(Q0L12A)

[HPE-HPE-STORAGE-P9M75A] HPE SN1600Q 32Gb 1p FC HBA(P9M75A)

[HPE-HPE-STORAGE-P9M76A] HPE SN1600Q 32Gb 2p FC HBA(P9M76A)

[HPE-HPE-STORAGE-R2J62A] HPE SN1610E 32Gb 1p FC HBA(R2J62A)

[HPE-HPE-STORAGE-R2J63A] HPE SN1610E 32Gb 2p FC HBA(R2J63A)

[HPE-HPE-STORAGE-R2E09A] HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter(R2E09A)

[HPE-HPE-STORAGE-R2E08A] HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter(R2E08A)

[LEN-0000001CV761] QLogic 16Gb Enhanced Gen5 FC Dual-Port HBA

Networking