FusionServer 2488H V6

| Mission-critical Servers, FusionServer 2488H V6 is the latest 2U 4-socket rack server. It is ideal for computing-intensive scenarios, such as cloud computing, virtualization, HPC, databases, and SAP HANA. Compared with two 2U 2-socket rack servers, the 2488H V6 saves more OPEX in virtualization of 25 x 2.5-inch drives for local storage. It incorporates patented technologies, such as DEMT and FDM, and integrates FusionDirector software for entire-lifecycle management, helping customers drive down OPEX and improve ROI. • Four 3rd generation Intel® Xeon® Scalable processors run on a 2U space. Each processor supports up to 28 computing cores. It supports Intel® Turbo Boost, hyper-threading, and AVX-512, improving server processing performance through six • Supports Intel® Deep Learning Boost. The latest BFloat16 instruction set and vector neural network instructions (VNNI) provide up to 93% higher training and 90% higher inference performance than the previous generation processors FP32. • Supports a maximum of 48 DDR4 DIMMss of the 3200 MT/s registered DIMMss (RDIMMs) and load-reduced DIMMss (LRDIMMs). The memory capacity is up to 12 TB, meeting the requirements of large-capacity memory applications. • Supports the use of 24 Optane™ PMem 200 series with DDR4 DIMMss. The memory capacity is up to 18 TB to meet the demands of various workloads. • Supports two dual-slot FHFL or four single-slot HHHL GPU heterogeneous accelerator cards, providing powerful computing power for AI analysis and training scenarios. • Supports a maximum of 25 x 2.5-inch SAS/SATA drives and 16 NVMe SSDs. Multiple storage media can be combined to achieve data tiering and ultimate performance. • Supports boot speedup storage technology (BSST). The OS is installed on two M.2 SSDs, which is deployed separately from service data. Supports hardware RAID and hot swappable for M.2 SSDs. • Adopts DEMT, driving down overall equipment power consumption by up to 15% without compromising workload performance through multiple power-saving measures such as component hibernation, PID/DTS algorithm based fan speed tuning, and active-standby power supplies. • Supports 900 W, 1200 W, 1500 W, 2000 W and 3000 W PSU options, meeting various workloads and high performance Intelligent Management and Openness for Integration » Intelligent maintenance integrates diagnosis and recovery, and accurately manages key components. The fault diagnosis accuracy reaches 93% and the breakdown rate decreases by 50%. » Intelligent discovery enables 100% accuracy of component-level visualization, automatic asset inventorying in seconds, and real-time track tracing. » Intelligent deployment enables pipelined deployment and one-clicks switchover on demand, improving deployment • Provides standardized open interfaces and development guides, facilitating seamless integration with third-party Server Type 2U rack server Processors Two or four 3rd Gen Intel® Xeon® scalable processors (5300/6300/8300 series), TDP up to 250 W Memory 48 DDR4 DIMMss, up to 3,200 MT/s; 24 Optane™ PMem 200 series, up to 2,666 MT/s. • 8 x 2.5-inch front SAS/SATA/NVME drives • 24 x 2.5-inch front SAS/SATA drives • 25 x 2.5-inch front SAS/SATA drives • 4 x 2.5-inch front SAS/SATA drives and 8 x NVMe SSDs • 4 x 2.5-inch front SAS/SATA drives and 16 x NVMe SSDs Supports RAID 0, 1,10, 5, 50, 6, or 60, optional supercapacitor for cache data power failure protection, RAID level migration, drive (Optional) One OCP 3.0 NIC: supports two GE, two 10GE, two 25GE, or two 100GE ports; supports hot-swappable, NC-SI, WOL, and PCIe Expansion Provides up to 11 PCIe 3.0 slots, including 9 rear I/O PCIe slots, 1 internal PCIe slot, and 1 OCP 3.0-dedicated FlexIO slot Heterogeneous Supports two dual-slot FHFL GPUs or four single-slot HHHL GPU heterogeneous accelerator cards. For details, Acceleration Cards see https://www.xfusion.com/en/ Fan Modules Six hot-swappable fan modules in N+1 redundancy mode Two hot-swappable PSUs in 1+1 redundancy mode. Supported options include: 2500 W (input: 200 V to 220 V AC) 2900 W (input: 220 V to 230 V AC) 3000 W (input: 230 V to 240 V AC) Power Supply • 2000 W AC Platinum PSUs 1800 W (input: 200 V to 220 V AC, or 192 V to 200 V DC) 2000 W (input: 220 V to 240 V AC, or 200 V to 288 V DC) • 900 W AC Platinum/Titanium PSUs (input: 100 V to 240 V AC, or 192 V to 288 V DC) • 1500 W HVDC PSUs (input: 260 V to 400 V DC, or 200 V to 277 V AC) • 1200 W DC PSUs (input: -38.4 V to -72 V DC) The iBMC chip integrates one dedicated GE management port to provide comprehensive management functions such as fault diagnosis, automated O&M, and hardware security hardening. Microsoft Windows Server、SUSE Linux Enterprise Serve、rVMware ESX、i Red Hat Enterprise Linux、CentOS、Oracle、 Ubuntu、Debian, etc. For details, see https://www.xfusion.com/en/ Supports power-on password, administrator password, Trusted Cryptography Module (TCM) /TPM 2.0, security panel, secure boot, and cover opening detection. Operating Temperat